Table of Contents
Advertisement
3
Multimeter Features
Capturing Maximum and Minimum Values (MaxMin)
The MaxMin operation stores the maximum, minimum, and average input values during a
series of measurements. When the input goes below the recorded minimum value or above
the recorded maximum value, the multimeter beeps and records the new value. The
elapsed time since the recording session was started is stored and shown on the display at
the same time. The multimeter also calculates an average of all readings taken since the
MaxMin mode was activated.
From the multimeter's display, you can view the following statistical data for any set of
readings:
– Max: highest reading since the MaxMin function was enabled
– Min: lowest reading since the MaxMin function was enabled
– Avg: average or mean of all readings since the MaxMin function was enabled
– MaxMinAvg: present reading (actual input signal value)
1 Press
2 Press
values.
Figure 3-4
3 The elapsed time is shown on the secondary display. Press
recording session.
102
to enable the MaxMin operation.
MaxMin
again to scroll through the Max, Min, Avg, or present (MaxMinAvg) input
MaxMin
MaxMin display
to restart the
Hold
Keysight U1281A/U1282A User's Guide
Advertisement
Table of Contents
