Table 1-10 Measurement Units Display - Keysight Technologies U1281A User Manual

Measurement units
The available signs and notations for each measurement function in your multimeter are
described in Table 1-10. The units listed below are applicable to the primary display and
secondary display measurements of your multimeter.
Table 1-10
Sign/Notation
M
k
n
μ
m
dBm
dBV
mV, V
A, mA, μA
nF, μF, mF
Ω, kΩ, MΩ
MHz, kHz, Hz
nS
ms
%
%
%
°C
°F
s
Keysight U1281A/U1282A User's Guide
Measurement units display
Description
Mega 1E+06 (1000000)
kilo 1E+03 (1000)
nano 1E–09 (0.000000001)
micro 1E–06 (0.000001)
milli 1E–03 (0.001)
Decibel unit relative to 1 mW
Decibel unit relative to 1 V
Voltage units for voltage measurement
Ampere units for current measurement
Farad units for capacitance measurement
Ohm units for resistance measurement
Hertz units for frequency measurement
Nano-Siemens unit for conductance measurement
Millisecond, unit for pulse width measurement
Percent, unit for duty cycle measurement
Percent, unit for the scale proportional to DC 0~20 mA
Percent, unit for the scale proportional to DC 4~20 mA
Degree Celsius, unit for temperature measurement
Degree Fahrenheit, unit for temperature measurement
Seconds, unit for Peak and Recording mode elapsed time
Introduction 1
45