Changing The Recording Option; Figure 4-5 Type Display - Data Logging - Keysight Technologies U1281A User Manual

4 Multimeter Setup Options

Changing the recording option

This setting is used with the multimeter's Data Logging feature (see page 107). There are
three available recording options for the multimeter's Data Logging feature.
Parameter
tYPE
To change the recording option:
1 Press
2 Press
Figure 4-5
3 Press
4 Press
5 Press and hold
124
Range
HAnd, triG, or AUto
while turning the rotary switch to access the Setup menu.
Shift
Esc
or on
Hold
icon appears to the left of the secondary display.
tYPE display - data logging
Vsense
or to set the recording option.
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
until is shown on the secondary display and the
to discard your changes.
Shift
Esc
Keysight U1281A/U1282A User's Guide
Defaul t setting
HAnd