Reviewing Previously Recorded Data (View); Figure 3-12 View Display; Figure 3-13 Empty View Display - Keysight Technologies U1281A User Manual

Reviewing Previously Recorded Data (View)

Viewing data stored in the multimeter's memory is performed through the
1 Press
previously stored records.
Figure 3-12
If nothing has been recorded, the secondary display will show horizontal lines instead.
Figure 3-13
2 Select the desired log type to view its entries.
3 Press
entries for the selected log type.
4 Press
Keysight U1281A/U1282A User's Guide
for more than 1 second to enter the multimeter's View mode. Press
Shift
Esc
again to scroll through the manual (H), interval (A), event (E), or export (
Shift
Esc
View display
Empty view display
i Press on
Hold
ii Press on
Hold
Vsense
iii Press to view the next stored entry. The index number increases by one.
iv Press to view the previous stored entry. The index number decreases by
one.
to delete the last stored entry, or press for more than 1 second to clear all
Hz
Save
for more than 1 second to exit the View mode.
Shift
Esc
to jump to the first stored entry.
to jump to the last stored entry.
Multimeter Features 3
key.
Shift
Esc
)
113