China Sensible Code Set Length 2 - Datalogic PowerScan 9500 Series Product Reference Manual

2D Global Features

China Sensible Code Set Length 2

This feature specifies one of the bar code lengths for
Length
Mode, or the second fixed length if in Fixed Length Mode. Characters can be
set from 0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 284
$CCSL2
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Product Reference Guide
Control. Length 2 is the maximum label length if in Variable Length
for detailed instructions on setting this feature.
Length 2 is 7,827 Characters
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad
senting your desired character(s). End by scanning
the ENTER/EXIT bar code again.
~
CANCEL
China Sensible Code
repre-
181