Bluetooth Hid Variable Pin Code - Datalogic PowerScan 9500 Series Product Reference Manual

Bluetooth HID Variable PIN Code

Specifies the selection available for Static or Variable Pin Code, when Blue-
tooth HID profile is configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8)
require a Variable PIN Code. When attempting connection, the application
presents a window that includes a PIN Code which is to be input using the
PowerScan BT9500. Scan the bar code "Variable PIN Code" below, then use
the host computer's Bluetooth manager to "Discover new devices" and select
"Datalogic Scanner." Use a text editor to see incoming data on the port des-
ignated by the computer's Bluetooth manager.
When you hear the beep and see the Green LED blinking indicating the
reader is waiting for an alphanumeric entry, enter the required variable PIN
Code by scanning the corresponding bar codes in
alphanumeric entry. Finish by scanning the Exit HID Variable PIN Code label.
$CBTHP00
Set Static Pin Code
~
CANCEL
Product Reference Guide
If you receive an error message, it may be necessary to disable
security on the device.
$CBTHP01
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Exit HID Variable PIN Code
Enter/Exit Programming Mode
Appendix D, Keypad
DEFAULT DEFAULT
Set Variable Pin code
for
229