Connecting And Disconnecting The Interface Cable - Datalogic PowerScan 9500 Series Product Reference Manual

Connecting and Disconnecting the Interface Cable

The BC9xx0 can be connected to a Host by means of a multi-interface cable,
which must be simply plugged into the Host connector, visible on the front
panel of the cradle.
To disconnect the cable, insert a paper clip or other similar object into the
hole corresponding to the Host connector on the body of the cradle. Push
down on the clip while unplugging the cable. Refer to the following figures:
*The power supply is optional, the cradle can be powered by the USB port. In
this case the full charging of an empty battery will take about 10 hours. For
intense usage and/or when the system is shut down during the night, the
use of an external power supply is recommended.
Product Reference Guide
Connecting/Disconnecting the Cable
Interface Emulation to Host
Power
Mounting the BC9xx0 Cradle
RS-232
USB*
WEDGE
13