China Sensible Code Set Length 1; China Sensible Code Set Length 2 - Datalogic Gryphom 4500 Series Product Reference Manual

CHINA SENSIBLE CODE

China Sensible Code Set Length 1

Specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
210
length if in Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in
increments of 0001 (pad with zeroes).
See "
Select China Sensible Code Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

China Sensible Code Set Length 2

This feature specifies one of the bar code lengths for "
trol" on page 210
the second fixed length if in Fixed Length Mode. Characters can be set from 0001 to
7,827 characters in increments of 0001 (pad with zeroes).
See "
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Set Length 1" on page 293
$CCSL1

0001 = Length 1 is 1 Character
. Length 2 is the maximum label length if in Variable Length Mode, or
Set Length 2" on page 294
$CCSL2

Length 2 is 7,827 Characters
China Sensible Code Length Control" on page
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
for detailed instructions on setting this feature.
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
ENTER/EXIT PROGRAMMING MODE
Appendix D, Keypad represent-
CANCEL
China Sensible Code Length Con-
Appendix D, Keypad represent-
CANCEL
PRODUCT REFERENCE GUIDE
211