Beep On Not On File; Ack Nak Options - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

Beep On Not on File

This option enables/disables the action of the reader to sound a three beep
sequence upon receiving a Not-On-File (NOF) host command.
$CBPNF00(CR)
Beep On Not On File = Disable
DEFAULT

ACK NAK Options

This enables/disables the ability of the reader to support the RS-232 ACK/
NAK protocol.
See page 274
DEFAULT
$CR2AE01(CR)
ACK/NAK Protocol = Enable for label transmission
$CR2AE03(CR)
ACK/NAK Protocol = Enable for label transmission and
host-command acknowledge
32
$CBPNF01(CR)
for more information.
$CR2AE00(CR)
$CR2AE02(CR)
Beep On Not On File = Enable
ACK/NAK Protocol = Disable ACK/NAK
ACK/NAK Protocol = Enable for host-command
acknowledge
PowerScan™ PD9530/PBT9500/PM9500