System Connections - Datalogic PowerScan 9500 Series Product Reference Manual

Setup
Attaching the Metal Plate to Base
Alternatively, the mount can be attached first to the base, then both can be
mounted to a wall as described above.
Figure 5. Attaching Mounting Plate to Base

System Connections

The BC9xx0 cradle provides a multi-interface connector and a power supply
connector as shown:
12
Connections should always be made with power off!
CAUTION
Power Supply
Base with Mount attached
Multi-Interface Connector
PowerScan™ PD9530/PBT9500/PM9500