I 2 Of 5 Set Length 1 - Datalogic PowerScan 9500 Series Product Reference Manual

Enter/Exit Programming Mode

I 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Length 1 is the minimum label length if in Variable Length Mode, or the first
fixed length if in Fixed Length Mode. The length includes the bar code's
check and data characters. The length can be set from 2 to 50 characters in
increments of two.
Table 8
detailed instructions on setting this feature.
Table 8. I 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT I 2 of 5 LENGTH 1 SETTING
Scan Two Characters From
5
Appendix D, Keypad
6 Scan ENTER/EXIT PROGRAMMING MODE
$CI2L1
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
126
provides some examples for setting Length 1. See
EXAMPLES
2 Characters
02
'0' and '2'
06 = Length 1 is 6 Characters
DEFAULT
I 2 of 5 Length
6 Characters 14 Characters
06 14
'0' and '6' '1' and '4'
~
CANCEL
PowerScan™ PD9530/PBT9500/PM9500
Control.
page 283 for
50 Characters
50
'5' AND '0'