Operation Status Register - Advanced Energy iLS600 Series User Manual

SECTION 6
SCPI Access
Access to the Temperature Status Register is via the following commands:
STATus:QUEStionable:HARDware[:EVENt]?
STATus:QUEStionable:HARDware:CONDition?
STATus:QUEStionable:HARDware:ENABle <value>
STATus:QUEStionable:HARDware:ENABle?

6.0.12 Operation Status Register

Figure 5 shows the Operation Status Register.
The Questionable Status Register takes the standard SCPI structure. The four individual
condition inputs are:
Measuring
Whenever the output is activated, the unit will be measuring. Therefore, Output Activated
serves as this condition.
STATUS AND ERRORS
Figure 5: Operation Status Register
iLS600, iLS600-R and iLS1500 Series
Rev. 05.20.21_#1.0
Rtn Event register
Rtn Condition register
Set Enable register
Rtn Enable register
advancedenergy.com 26