Advanced Energy iLS600 Series User Manual page 41

APPENDIX
•
Temperature Error
•
Watchdog Error
16 Execution Error (not used)
32 Command Error (not used)
64 User Request (not used)
128 Power On (not used)
The command *ESE 0 clears this register.
*ESE?
— Returns the present contents of the Standard Event Status Enable Register. The
contents are described in the description of *ESE. If multiple bits are set, the result is the
sum of the set bit values.
*ESR?
— Returns the present contents of the Standard Event Status Event Register.
*IDN?
— Returns the identification string for this unit. The string will contain:
•
Company name – "Artesyn Power"
•
Model – For example "Bench 100-10 iLS"
•
Unit serial number. For example, "031418032001".
•
Control/Interface processor software revisions. For example,
"1.00.0051/1.00.1361".
Fields are separated by commas. Serial numbers and software revisions are separated
by forward slashes.
*OPC
— This command triggers the Operation Complete Flag in the Standard Event Status
Event Register.
 Output Board Over-Temperature
 Primary Board Over-Temperature
 Fan stall
iLS600, iLS600-R and iLS1500 Series
Rev. 05.20.21_#1.0
advancedenergy.com 41