Table of Contents
Advertisement
iLS600, iLS600-R and iLS1500 Series
SECTION 7
DRIVERS
Installation of either a USB then a Labview or an IVI driver is the first step towards using the
power supply with Labview. If the user plans on only using Labview the Labview driver will
suffice. If the user wants to program in a C environment an IVI driver should be used.
7.0 USB Driver
USB drivers are available on the Artesyn Power website at
https://artesynpower.com/drivers/. Be sure to download and extract the Bench USB Driver
to your local drive. The extraction location will be required in later steps.
The standard USB input is a USB 2.0 full speed compatible USB port.
To install the USB drivers be sure to first make sure the unit is powered on and the Bench
unit is connected to the computer's USB port.
1) Open Device Manager and locate the "BENCH iLS SUPPLY" under Other devices. Right
click on "BENCH iLS SUPPLY" and select properties.
advancedenergy.com
34
Rev. 05.20.21_#1.0
Advertisement
Table of Contents
