Advanced Energy iLS600 Series User Manual page 33

Intelligent laboratory power 600w/1500w
Table of Contents

Advertisement

SECTION 6
Message Available (MAV)
As BENCH iLS does not initiate any message, this bit is not used.
Standard Event Status
If a Standard Event has occurred and is enabled to feed the Status Byte Register, this bit will
be set.
Summary Bit (RQS)
Any of the four functioning bits of the Status Byte Register being set and enabled (in the
Service Request Enable Register) will cause this bit to be set.
Operation Status
If an Operation Event has occurred and is enabled to feed the Status Byte Register, this bit
will be set.
SCPI Access
Access to the Status Byte Register is via:
*STB?
Access to the Service Request Enable Register is via:
*SRE <value>
*SRE?
STATUS AND ERRORS
Rtn register
Set register
Rtn register
iLS600, iLS600-R and iLS1500 Series
Rev. 05.20.21_#1.0
advancedenergy.com
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ils600-r seriesIls1500 series

Table of Contents