Table of Contents
Advertisement
APPENDIX
STATus:OPERation:ENABle <value>
Register to the specified value. The value is specified in decimal form described in the
description of "STATus:OPERation:CONDition?". A value 0 clears all Enables.
STATus:OPERation:ENABle?
Register contents. The returned value is in decimal form described in the description of
"STATus:OPERation:CONDition?". If multiple bits are set, the result is the sum of the set bit
values.
STATus:OPERation[:EVENt]?
Register contents. The returned value is in decimal form described in the description of
"STATus:OPERation:CONDition?". If multiple bits are set, the result is the sum of the set bit
values.
STATus:PRESet
— Set the Enable Registers for Operation Status, Questionable Status,
Temperature Status, and Hardware Status to their default values. (Default value of all four
Enable Registers is zero.)
STATus:QUEStionable:CONDition?
Questionable Status Condition Register. If multiple bits are set, the result is the sum of the
set bit values.
1
2
4
8
16
32
64
128
256
512
1024
2048
— This command sets the Operation Status Enable
— This command returns the Operation Status Enable
— This command returns the Operation Status Event
— This command returns the present contents of the
Over-Voltage Error
Over-Current Error
Summary of Time (not used)
Over-Power Error
Summary of Temperature
Summary of Frequency (not used)
Summary of Phase (not used)
Summary of Modulation (not used)
Not Calibrated
Summary of Hardware
Watchdog Error
Self-Test Error
iLS600, iLS600-R and iLS1500 Series
Rev. 05.20.21_#1.0
advancedenergy.com
47
Advertisement
Table of Contents
