Rear Usb Board - HP Pavilion HDX Maintenance And Service Manual

Rear cover (see
e.
Top cover (see
f.
Remove the power connector LED board:
Disconnect the power connector LED board (1) from the system board.
1.
Remove the power connector LED board (2).
2.
Reverse this procedure to install the power connector LED board.

Rear USB board

Description
Rear USB board (includes cable)
Before removing the rear USB board, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Hinge cover (see
d.
Rear cover (see
e.
Top cover (see
f.
66 Chapter 4 Removal and replacement procedures
Rear cover on page 53)
Top cover on page 55)
Battery on page 36).
Hard drive on page 42)
Optical drive on page
Keyboard on page 50)
Hinge cover on page
Rear cover on page 53)
Top cover on page 55)
49)
52)
Spare part number
452315-001