Remove the processor heat sink (3).
4.
NOTE:
and system board components, it may be necessary to move the processor heat sink from side to
side to detach it.
NOTE:
sink (1) and the system board (2) each time the processor heat sink is removed. Thermal material
must be installed on all surfaces before the processor heat sink is reinstalled. Replacement thermal
material is included with all processor heat sink, system board, and processor spare part kits, and
is also available using spare part number 413706-001.
Reverse this procedure to install the processor heat sink.
Processor
NOTE:
All processor spare part kits include replacement thermal material.
Desription
Intel Core 2 Extreme processors (800-MHz FSB, 44-W):
X9000, 2.8-GHz processor, 6-MB L2 cache
Due to the adhesive quality of the thermal material located between the processor heat sink
The thermal material must be thoroughly cleaned from the surfaces of the processor heat
Spare part number
459610–001
Component replacement procedures
77
Need help?
Do you have a question about the Pavilion HDX and is the answer not in the manual?