Hinge Cover - HP Pavilion HDX Maintenance And Service Manual

Slide the keyboard (2) forward until the tabs on the rear edge of the keyboard disengage from the
6.
slots in the top cover.
Rotate the rear edge of the keyboard (3) forward until it rests upside down on the palm rest.
7.
Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and
8.
disconnect the keyboard cable (2).
Remove the keyboard.
9.
Reverse this procedure to install the keyboard.

Hinge cover

Description
Hinge cover
52 Chapter 4 Removal and replacement procedures
Spare part number
452311-001