File menu
Select
System information
Restore defaults
Ignore changes and exit
Save changes and exit
Security menu
Select
Setup password
Power-On password
Diagnostics menu
Select
Hard Drive Self-Test options
Memory Check
System Configuration menu
NOTE:
Some of the listed System Configuration options may not be supported by your computer.
Select
Language (or press f2)
Boot options
Device configurations
86
Chapter 5 Computer Setup
To do this
View and change the system time and date.
●
View identification information about the computer.
●
●
View specification information for the processor, memory, and system ROM.
Replace the configuration settings in Computer Setup with factory settings.
(Password and security settings are not changed when you restore the factory
settings.)
Cancel any changes entered during the current session. Then exit and restart the
computer.
Save changes entered during the current session. Then exit and restart the computer.
Your changes go into effect when the computer restarts.
To do this
Enter, change, or delete a setup password.
Enter, change, or delete a power-on password.
To do this
Run a comprehensive self-test on any hard drive in the system.
Run a comprehensive check on system memory.
To do this
Change the Computer Setup language.
Set f9, f10, and
f12
delay when starting up.
●
●
Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
Enable/disable internal network adapter boot.
●
Set the Express Boot Popup delay in seconds.
●
Set the boot order.
●
●
Enable/disable Virtualization Technology.
●
Enable/disable button sound.