Remove the audio/infrared board:
Disconnect the audio/infrared board cable (1) from the system board.
1.
Remove the two Phillips PM2.5×5.0 screws (2) that secure the audio/infrared board to the computer.
2.
Remove the audio/infrared board (3) from the base enclosure.
3.
Reverse this procedure to install the audio/infrared board.
Bluetooth module
NOTE:
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is available in the Cable Kit, spare part number 448169-001.
Description
Bluetooth module
Before removing the Bluetooth module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Hinge cover (see
d.
Battery on page
36).
Hard drive on page
42)
Optical drive on page
Keyboard on page
50)
Hinge cover on page
49)
52)
Component replacement procedures
Spare part number
398393-002
63