2.
Remove the display switch module (2).
Reverse this procedure to install the display switch module.
Rear USB board
Description
Rear USB board (includes rear USB board cable)
Before removing the rear USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
e.
f.
g.
90
Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see
Hard drive on page
Optical drive (see
Optical drive on page
Switch cover (see
Switch cover on page
Keyboard (see
Keyboard on page
Speaker assembly (see
Display assembly (see
Top cover (see
Top cover on page
47).
52)
59)
61)
63)
Speaker assembly on page
Display assembly on page
75)
Spare part number
449762-001
66)
69)