Bluetooth module
Description
Bluetooth module
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
Remove the Bluetooth module:
1.
Disconnect the Bluetooth module cable (1) from the system board.
2.
Remove the Phillips PM2.0×3.0 screw (2) that secures the Bluetooth module to the system
board.
Battery on page
39).
Hard drive on page
41)
Optical drive on page
Keyboard on page
49)
Switch cover on page
Display assembly on page
Top cover on page
56)
43)
51)
53)
Component replacement procedures
Spare part number
483113-001
487697-001
61