Table of Contents
Advertisement
Bluetooth module
Description
Bluetooth module (includes Bluetooth module cable)
Before removing the Bluetooth module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the following components:
5.
Hard drive (see
a.
Optical drive (see
b.
Keyboard (see
c.
Switch cover (see
d.
Display assembly (see
e.
Top cover (see
f.
Remove the Bluetooth module:
Disconnect the Bluetooth module cable (1) from the system board.
1.
Remove the Phillips PM2.0×3.0 screw (2) that secures the Bluetooth module to the system board.
2.
Remove the Bluetooth module (3).
3.
Battery on page
36).
Hard drive on page
38)
Optical drive on page
Keyboard on page
47)
Switch cover on page
Display assembly on page
Top cover on page
54)
40)
49)
51)
Component replacement procedures
Spare part number
412766-002
59
Advertisement
Table of Contents
