Hinge Cover - HP 640 ProBook G3 Series Maintenance And Service Manual

Hinge cover

Description
Hinge Kit for 14" products
Hinge Kit for 15" products
Hinge cover for 14" products
Hinge cover for 15" products
Hinge cover for 14" products with a touch screen
Hinge cover for 15" products with a touch screen
IMPORTANT:
replacement
Before removing the hinge covers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the following components:
a. Service door (see
b. Remove the battery (see
c. Hard drive (see
d. Solid-state drive (see
e. WWAN module (see
f. WLAN module (see
g. Optical drive (see
h. Keyboard (see
i. Memory (see
Remove the hinge covers:
▲ Remove the 2 M2x5L P1 screws (1), and then remove the hinge covers (2).
Make special note of each screw and screw lock size and location during removal and
Service door on page
Battery on page
Hard drive on page
Solid-state drive (select products only) on page
WWAN module (select products only) on page
WLAN module on page
Optical drive on page
Keyboard on page
Memory on page
37).
38)
39).
43).
45).
47).
50).
Spare part number
840684-001
840737-001
840685-001
840738-001
840686-001
840739-001
41).
42).
Component replacement procedures 53