Hinge Cover - HP Pavilion x2 Detachable Maintenance And Service Manual

Description
In Blizzard White
In Sunset Red
Before removing the TouchPad, follow these steps:
1. Remove the tablet from the keyboard (see
then remove the following components:
a. Keyboard base (see
b. Hard drive (see
c. Keyboard board (see
2. Release the TouchPad cable (2) from the ZIF connector (1) .
3. Remove 4 screws (3) from the TouchPad bracket, and then lift the bracket(4) to remove it.
4. Lift the TouchPad (5) to remove it.
Reverse this procedure to install the TouchPad.

Hinge cover

Description
Hinge cover in Turbo Silver for products equipped with a hard drive
Hinge cover in Blizzard White for products equipped with a hard drive
Hinge cover in Sunset Red for products equipped with a hard drive
44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Releasing the tablet from the keyboard base on page
Keyboard base on page
Hard drive (select products only) on page
Keyboard board on page
40).
41).
43).
Spare part number
835706-001
835707-001
22), and
Spare part number
833629-001
833630-001
833631-001