Ask/Fsk Modulation Analysis - Keysight Technologies N9321C User Manual

Key Reference
MODE

ASK/FSK Modulation Analysis

Carrier Freq
Symbol Rate
148
Use the arrow keys to highlight the mode you need and press
[ENTER] as a terminator. When this mode is selected, the ASK/FSK
modulation analysis menu will be displayed.
Sets the modulated carrier frequency.
Key access: Mode > ASK/FSK Modulation Analysis
This specifies the fundamental symbol rate of the signal to be
analyzed. The values should be positive. The non-positive value will
be converted to 1Hz. The measurement accuracy will be impacted
if this value isn't set precisely.
Key access: Mode > ASK/FSK Modulation Analysis
Filter Setup
Accesses the Filter setup submenu for further configuration.
Key access: Mode > ASK/FSK Modulation Analysis
Meas Filter Selects the measure filter as Root Nyquist, Nyquist, and
Ref Filter
Alpha/BbT Sets the root-off factor for Root Nyquist and Nyquist
Filter
Symbols
View
Accesses the submenu to select four display mode:
Symbol - displays the binary symbol in full screen/window.
Waveform - displays the signal waveform.
ASK Error - displays the ASK error.
Eye Diagram - Displays the Eye diagram.
Key access: Mode > ASK/FSK Modulation Analysis
Gaussian.
Selects the reference filter as Root Nyquist, Nyquist,
and Gaussian.
filter or BbT for Gaussian filter.
Sets the symbol numbers for the selected filter. The
allowed value range is from 2 to 25.