Key Reference
MODE
AM/FM Modulation Analysis
Carrier Freq
144
Use the arrow keys to highlight the mode you need and press
[ENTER] as a terminator. When this mode is selected, the AM/FM
modulation analysis menu will be displayed.
Sets the modulated carrier frequency.
Key access: Mode > AM/FM Modulation Analysis
IFBW
This specifies the IF bandwidth for the signal to be analyzed. The
measurement accuracy will be impacted if this value isn't set
precisely.
Key access: Mode > AM/FM Modulation Analysis
EqLPF
This specifies the IF bandwidth for the signal to be analyzed. The
measurement accuracy will be impacted if this value isn't set
precisely.
Key access: Mode > AM/FM Modulation Analysis
Filter Setup
Accesses the Filter setup submenu for further configuration.
Key access: Mode > AM/FM Modulation Analysis
Meas Filter Selects the measure filter as Root Nyquist, Nyquist, and
Ref Filter
Alpha/BbT Sets the root-off factor for Root Nyquist and Nyquist
Filter
Symbols
Gaussian.
Selects the reference filter as Root Nyquist, Nyquist,
and Gaussian.
filter or BbT for Gaussian filter.
Sets the symbol numbers for the selected filter. The
allowed value range is from 2 to 25.