Keysight Technologies N9321C User Manual page 141

Abs AND Rel Set the limit test to show Fail if one offset's spectrum
Abs OR Rel
Meas BW Specifies the bandwidth to use when measuring the offset. When
using the front panel, only the currently selected offset is affected.
All the offsets are affected when remote control. This is the
multiplier applied to the resolution bandwidth to determine the
bandwidth to integrate when calculating the power. Meas BW is
restricted to be 1 and not changeable.
Key access: Meas > SEM > Offset/Limits > More > More
emission mask measurement results is larger than
both the corresponding limit for Abs Start and Abs Stop
and the limit for Rel Start and Rel Stop.
Set the limit test to show Fail if one offset's the
absolute spectrum emission mask measurement
results is larger than the corresponding limit for Abs
Start and Abs Stop or the limit for Rel Start and Rel Stop.
Key Reference
Meas
133