Execution Conflict - Keysight Technologies N9321C User Manual

Execution Conflict

The system messages listed below are execution conflicts,
indicating settings conflict during your operation.
Execution Error
-200
This is the generic syntax error for devices that cannot detect more
specific errors.
Data out of range
-222
A legal program data element was parsed but could not be
executed because the interpreted value was outside the legal
range defined by the device. The displayed results may be clipped.
Too much data not all points entered
-223
Indicates that a legal program data element of block, expression, or
string type was received that contained more data than the device
could handle due to memory or related device-specific
requirements.
Illegal parameter value
-224
An attempt was made to select a user file that contains 0 bits.
Select another user file that contains at least 1 bit.
Hardware missing
-241
Missing device hardware. For example, the RF board is not
installed.
Corrupt media
-253
A source media (possibly EEPROM) for a data file is corrupt. This
error is usually seen in conjunction with errors concerning a certain
file.
Device-specific error
-300
This is the device-specific error for devices that cannot detect more
specific errors.
Instrument Messages
Execution Conflict
177