Keysight Technologies N9321C User Manual page 190

Instrument Messages
Device-Specific Errors
182
No Peak Found
780
No signal peak was found that meets the criteria under Peak
Search > Peak Criteria.
Video Trigger cannot be active
781
You sent a remote command to do one of the following:
• Turn on video trigger while the Average Detector or a Marker
Function is active.
• Turn on the Average Detector or a Marker Function while Video
Trigger is active.
Video Trigger cannot be used with Mkr Func
782
Due to the Average Detector, the video Trigger cannot be used
with Maker function.
Allowable span for current CF exceeded
783
Allowable CF for current span exceeded
784
Doing Alignment
805