Keysight Technologies N9321C User Manual page 189

Unable to load state from file
752
Attempt to load a state from a file failed.
Unable to save state to file
753
Attempt to save a state to a file failed. See the associated error
messages for the cause.
Unable to load user state
757
A user preset failed, so the factory preset values were used. Save a
valid state into user preset and try again.
Unable to save user state
758
Attempt to save a user preset state failed.
Unable to query state
760
Query of state over the remote interface was unsuccessful.
Unable to load file
762
A failure occurred while loading a file.
Unable to save file
764
Attempt to save a file failed; the file was not saved.
Fatal LDS error
767
Attempt to initialize the instrument state has failed. Cycle
instrument power. If this fails to correct the problem, contact your
nearest Keysight Technologies service center.
Unable to load user state
768
Attempt to load a state failed, because the state was saved
with a
measurement personality that is not currently loaded. Load
the appropriate personality and try again.
Incorrect filename
770
You sent a remote command to save a screen file but did not
specify a valid extension.
Instrument Messages
Device-Specific Errors
181