Keysight Technologies N9321C User Manual page 74

Functions and Measurements
Channel Scanner
66
Toggle Edit Method to underline Std. It allows you to set the
range according to the embedded communication standard,
such as CDMA and GSM which is used specifically in different
countries. Press Signal Std to select the standard. Press Recall as
a terminator. Press Begin Chn and End Chn to set the begin and
end channel for scanning. Press Apply to apply all the range set-
tings.
If you toggle Edit Method to underline Custom, it allows you to set
the customer-defined scan as your need.
Press Start Freq to set the scan start frequency.
Press Freq Step Size to set the frequency interval for adjacent
channels.
Press Bandwidth to set the bandwidth of each frequency channel
which is used to calculate the channel power.
Press Number of Chn to set the number of frequency channels
which will be scanned.
Press Apply as a terminator to apply all the settings above.
5 Press Scan Start to initiate the channel scan function.
6 Press Logging Start to start recording the scan process which
includes the channel power and related channel bandwidth
value to a CSV file. Press Logging Stop to end the logging. The
CSV file will be saved immediately.