Keysight Technologies N9321C User Manual page 146

Key Reference
MODE
General Setup
138
Meas Disp Accesses the Meas Disp submenu for defining the display range
and resolution while in Power Meter mode.
Key access: Mode > Power Meter
Disp
Range
Resolutio
n
1 2 3 4
Accesses the power meter measurement setup submenu.
Key access: Mode > Power Meter
Accesses the associated Disp Range submenu.
Key access: Mode > Power Meter > Meas Disp
Auto Toggles the auto range function between On
Range and Off. When the Auto Range is set to On, the
Top and Bottom value of the power meter's
display range will be set automatically
according to the measurement data:
Top = Max. data + 0.5
Bottom = Min. data - 0.5
The default setting is Off.
Top Sets the top value of the power meter' display
range.
Range from (Bottom + 0.01) to 200 dBm.
The default value is 20 dBm.
Bottom Sets the bottom value of the power meter'
display range.
Range from - 200 to (Top - 0.01) dBm.
The default value is - 70 dBm.
Accesses the associated Resolution submenu.
When the measurement suffix is W or %, this parameter
represents the number of significant digits. When the
measurement suffix is dB or dBm, 1 through 4 represents
1, 0.1, 0.01, and 0.001 dB respectively. The default value
is 3.
Key access: Mode > Power Meter