Key Reference
Amplitude
106
Corrections
Accesses the corrections submenu to enable the corrections
function for amplitude compensation. The amplitude correction is
used to compensate the gain/attenuation from antenna/cable.
Please refer to the procedures below to use the amplitude
correction function.
1 Please refer to the procedures below to create a correction file in
BSA PC software.
a Open the PC software.
b Press File > New > Correction to access the correction file
editing pop-up menu.
c Refer to the figure below to add the point data with frequency
and amplitude offset value.
Figure 4 Editing correction file in PC software
d When the editing is completed, press Save/Save As to save
the correction file.