Maintenance Processes - quadient IS-6000 User Manual

10.6

Maintenance processes

You have to connect as a Supervisor (see
These processes are only to be completed on request from your Customer Service.
Check that your Mailing System is connected to the LAN before starting.
As supervisor:
From the main menu, select the path:
1. Withdraw a PSD
- Remove PSD from service.
- Requires a password from Customer Services to perform.
2. Install a PSD
- Allows installation of a new PSD in mail system. Old PSD must have already
been withdrawn.
3. Update registration
- This procedure is used if you have changed your address.
- Contact Customer Service to change your information. You will be instructed to
perform the update registration procedure.
Performing the Update Registration Procedure to Change
Address
This procedure is used if you have changed your address. Contact Customer Service to
change your information. You will be instructed to perform the update registration procedure.
Check that your Mailing System is connected to LAN before starting.
How to Log in as Supervisor
Maintenance Service processes
on page 236).
335
10