quadient IS-6000 User Manual page 66

Using Labels
You may print postage on precut, self-adhesive labels or thermal, pressure sensitive roll
tape.
Two label dispensers are available:
• Internal label dispenser (ILD) for precut labels. This is a standard feature on the
Mailing System. See
• Remote label dispenser (optional RLD), that uses a thermal roll tape. This is an
optional accessory. See
Running Mail Using the Dynamic Weighing Module
The Dynamic Weighing Module uses a four-point detection system to weigh and rate mail.
It measures the length, width, thickness and weight to properly determine the mailing format
within the mail class and rate the mail pieces. Two modes are available when using the
Dynamic Weighing Module:
• Dynamic weighing - Weigh All: the Dynamic Weighing Module measures and
weighs each piece. Use this for mixed mail rating.
• Weigh First Piece: the Dynamic Weighing Module only measures and weighs the
first piece for an identical batch of mail. Use this to validate the correct rate for the
first piece. By using this mode, you will set the mail class for reporting and print the
mail class inscription on the envelope.
Filling the Internal Label Dispenser
Printing Using the Remote Label Dispenser
on page 119.
on page 120.
3
61