How To Add Or Delete Permits - quadient IS-6000 User Manual

Adding or Deleting Permits

How to Add or Delete Permits

To add a permit:
1. Display the list of permits (see
2. Select Add new and connect the memory device to an USB port of the machine (on
your left hand side at the rear of the base. (See
3. Press [OK]. The USB memory device content is displayed.
9
4. Select a permit to load into the machine and press [OK].
The permit list is updated with the new permit.
To delete a permit:
1. Select the permit to delete and press [Delete].
2. Confirm deletion, otherwise press [Cancel].
The system updates the permit list.
314
How to Display the List of Permits
Base connectors
on page 313).
on page 359).