Running Mail In Manual Weighing Mode - quadient IS-6000 User Manual

Running Mail in Manual Weighing Mode

The Mailing System offers for manual weighing:
• Manual weight entry (
value. This may be used if the weight exceeds the limit of your Weighing Platform
but another scale has been used to determine the weight.
• Manual postage entry or No weight source (
known postage value. Please note that if you manually enter in the postage amount,
it will not track the mail class for reporting and will note automatically print the mail
class inscription (that is to say "Presort First Class" for example) on the envelope.
Running Mail in Manual Weighing Mode
A) To print on envelopes
From the home screen:
1. Press [start]
System motors start running.
2. To print the stamp on the envelope, insert it into the mail path against the rear-guide
wall, with the side to be printed facing upwards, and covering the optical sensor.
The Mailing System prints postage and the mail pieces are sent to the mail tray or
stacker.
), where you enter a known weight to calculate the postage
See Entering Postage Manually
procedure below to print in the following manual modes:
), when you directly key in the
on page 88, then follow the
3
67