How To Enable / Disable The Beeps; How To Change The Beeps By Default - quadient IS-6000 User Manual

How to Enable / Disable the Beeps

To enable or disable the beeps:
1. As a user:
Press Menu and select the path:
2. Press Beep on key and/or beep on error buttons.
3. Press [OK] to validate.
8
Setting Default System Beeps
You can set the default beep state for users.

How to Change the Beeps by Default

You have to connect as a Supervisor (see
To change the sounds by default:
1. As supervisor:
From the main menu, select the path:
preferences Sounds
2. Press Beep on key and/or Beep on error to enable or disable the sounds.
3. Press [OK] to validate.
272
User Preferences
This is a user setting that only lasts as long as you are logged in.
How to Log in as Supervisor
Default user settings
on page 236).
Default user