quadient IS-6000 User Manual page 69

2. Remove the envelope from the WP.
3. Place the envelope (or identical set) on the hopper. Mail should be placed against the
rear wall and covering the optical (clear) sensor.
3
The Mailing System applies postage and the envelopes are sent to the mail tray or
stacker.
To print on one or several identical labels
1. Press [label printing].
A label selection screen is displayed.
2. Using the keypad or the arrows, enter the number of labels being printed.
3. You may change the label dispenser, if you are connected to a remote label dispenser.
4. Press [start] to start printing.
64