Sealer Default Settings; How To Set The Default Mixed Sealing - quadient IS-6000 User Manual

8.8

Sealer Default Settings

Sealing Default Mode
As supervisor, you can set the sealing state by default.
Three sealing modes are available:
• Sealing on: nested and sealed
• Sealing on: nested and closed flaps
• No sealing.
See also
• Checking the Sealing Mode

How to Set the Default Mixed Sealing

You have to connect as a Supervisor (see
To modify the default mixed sealing:
1. As supervisor:
From the main menu, select the path:
Default Mixed Sealing
2. Choose one of the three states.
3. Press [OK] to validate.
on page 57
How to Log in as Supervisor
Default User Settings
on page 236).
Base settings
259
8