Steps To Run Permit Mail - quadient IS-6000 User Manual

Running Permit Mail
After completing the initial set up in
the steps below to run mail.

Steps to Run Permit Mail

From the Print Mode: [Permit mail] home screen:
1. Start a new Operational Permit Report if necessary.
Press Reset/Report to open the Operational Permit Report screen and start a new
report.
You can also print the current report before starting the new one.
2. Select the sealing mode that corresponds to your mail stack: see
Sealing Mode on page 57.
3. Depending on the weighing mode selected, run mail according to one of the sections
below:
Steps to Run Mail in Dynamic Weighing Modes
Running Mail in Standard Weighing Mode
Running Mail in Manual Weighing Mode
Steps to Set Up Permit Mail Printing
When the sealer is activated, collect the mail piece stack in the
catch tray and put the stack aside to let the envelopes dry.
on page 62
on page 63
on page 67
on page 74, follow
Checking the
77
3