How To Activate / Deactivate An Operator; How To Delete An Operator - quadient IS-6000 User Manual

How to Activate / Deactivate an Operator

To activate or deactivate an Operator:
1. Perform the procedure
2.
In the operator parameters, select Active or Inactive and then press [OK].
3. On the Operator modification summary screen, press [OK].
4. A feedback of the status is displayed in the operator list.
Deleting Operators
Use the procedure below to delete operators.

How to Delete an Operator

To delete an Operator:
1. Display the Operator list screen (see
2. Select the operator and press Delete.
The Delete confirmation screen is displayed.
3. Press [OK] to delete the operator, otherwise press Back.
How to Modify an Operator
How to Display the Operator List
on page 164, steps 1 and 2.
on page 161).
5
167