How To Adjust The Mail Thickness Settings - quadient IS-6000 User Manual

How to Adjust the Mail Thickness Settings

For mail over 0.67" thick:
There is a thin/thick mail latch under the top cover of the Feeder.
For normal operation, the lever will be to the left. However, for processing a batch of
3
thick mail over 0.67", move the lever to the right, especially if the thicker envelopes
won't feed into the mail path. You will find the pictogram below on your Feeder as a
reminder.
1. Open the Feeder cover.
2. Change the lever position:
- left: for standard or thin mail
- right: for thick mail over 0.67"
3. Close the Feeder cover.
108
Return the lever to the normal position (left) after processing a batch
of thicker mail. This will prevent normal mail from double or
multi-feeding.