Maintenance Processes - quadient IS-350 User Manual

10.4
Maintenance process details
The maintenance processes listed below are only to be completed on request from by
Customer Service.
Check that your Mailing System is connected to the LAN or modem before starting.
As supervisor (see
Press
1. Remove the Base
- Remove the base from service.
- Prepares the base for removal by saving data on USB key.
2. Withdraw the Meter
10
- Remove Meter from service.
- Requires a password from Customer Services to perform.
3. Update Registration
- This procedure is used if you have changed your address.
- Contact your Customer Service to change your information then you will be
instructed to perform the update registration procedure.
Performing the Update Registration Procedure to Change
your Address
This procedure is to be used if you have changed address.
First contact your Customer Service to update your details, then you will be instructed
to perform the update registration procedure.
186

Maintenance Processes

How to Log in as Supervisor
and select the path:
on page 130):
Maintenance Processes