quadient IS-6000 User Manual page 70

Running Mail in Differential Weighing Modes
Differential weighing offers faster, more efficient mail processing when using an external
Weighing Platform (WP). In this mode, you can place a stack or container of mail on the
Weighing Platform. The weight is then calculated as each mail piece is removed from the
Weighing Platform (by calculating the differential from the amount on the Weighing Platform
less the weight removed).
Two differential weighing modes are available:
• Differential Weighing: when a mail piece is removed from the WP, the weight is
determined, the rate is automatically set and the envelope hoppers' motors start to
run. If a tape is required in this mode, simply press the Label button.
• Differential Weighing Auto-Tape: when a mail piece is removed from the WP, the
weight is determined, the rate is automatically set and a label is immediately printed.
Follow the steps below for each of the two differential weighing modes.
To quit the Differential Weighing Mode and go back to the Standard
Weighing mode, press Exit on the home screen.
When you remove the last object from the WP, the Mailing System
asks for a confirmation before printing. This allows you to use a
mail basket without having to first tare the WP.
3
65