7.9
Security Certificate and Key CLI Commands
The following table lists keys and certificates loaded into runtime settings at reboot. Use
the CLI command '
dsa_key_<mac>.pem
rsa_key_<mac>.pem
ssl_cert<mac>.pem
ssl_key<mac>.pem
fact_wacert_<mac>.der*
fact_wcert_<mac>.der*
fact_wkey_<mac>.der*
usr_wacert_<mac>.der*
usr_wcert_<mac>.der*
usr_wkey_<mac>.der*
The following table lists the keys and certificates entered by the operator (administrator).
Use the CLI commands
to update the DSA and RSA key files locally on the AN-80i.
'generate'
dsa_key_<mac>.pem
rsa_key_<mac>.pem
ssl_cert<mac>.pem
ssl_key<mac>.pem
usr_wacert_<mac>.der*
usr_wcert_<mac>.der*
usr_wkey_<mac>.der*
Use the following CLI commands to view and modify the security certificates and keys.
show files <mode>
List the key and certificate files.
<mode>
70-00072-01-07
AN-80i
' to display the runtime settings.
show files run
Table 65: Security -- Runtime Keys and Certificates
DSA key used for SSH.
RSA Key used for SSH.
SSL X.509 certificate.
SSL RSA key.
Factory X.509 authority certificate for the wireless
cryptographic module. Can not be changed by the end-
user.
Factory X.509 certificate for the wireless cryptographic
module.
Factory RSA key for the wireless cryptographic module.
User
X.509
cryptographic module.
User X.509 certificate for the wireless cryptographic
module.
User RSA key for the wireless cryptographic module.
*Not used in v3.00 software release.
and '
'load'
del
Table 66: Security -- User Key and Certificate Files
DSA key used for SSH.
RSA Key used for SSH.
SSL Certificate.
SSL Key.
User wireless authority certificate
User wireless certificate.
User wireless key.
*Not used in v3.00 software release.
run - displays keys currently in use.
usr - displays user-specified keys and certificates (default if mode not
specified).
Proprietary Redline Communications © 2008
&
authority
certificate
' to add and remove files. Use the CLI command
Page 102 of 106
User
Manual
for
the
wireless
Sept 18, 2008