5.3.5
Freq
Use the freq command to configure frequency ranges when using autoscan or DFS.
PTP
PMP
√
5.3.6
Generate
Use the generate command to generate a DSA or RSA key for use with SSH.
PTP
PMP
√
5.3.7
Get
Use the get command to view system parameters. Use the following general format to
view a parameter:
get [field] <Enter>
PTP
PMP
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
70-00072-01-07
AN-80i
Table 25: CLI - freq
Parameter/Description
freq
add
Add a frequency range (up to 32 ranges).
<begin>
<end>
del
Delete a frequency validation range
<index>
print
Print the list of frequency validation ranges.
Local frequency ranges:
<index> <begin> <end>
reload Reload the active list of frequency validation ranges.
Table 26: CLI - generate
Parameter/Description
generate sshkey <type>
Create keys of the specified type. The keys are saved in flash and runtime
memory.
<type> Can be dsa or rsa.
Table 27: CLI - get
Parameter/Description
calcdst: Calculated link distance between units.
erxpkt: Number of Ethernet packets received.
erxpktd: Number of Ethernet packets received that were discarded.
etxpkt: Number of Ethernet packets transmitted.
mac: AN-80i MAC address.
radiotype: Radio type.
rffreq: Current RF frequency setting.
rflink: Status of the RF link.
rfstatus: Status RF transmitter.
rssimax: Maximum RSSI.
rssimean: Mean RSSI.
rssimin: Minimum RSSI.
Proprietary Redline Communications © 2008
&
- start frequency (MHz)
- end frequency (MHz)
- Frequency validation range index
User
Manual
Page 69 of 106
Sept 18, 2008