Link Screen; Table 17: Pmp Maximum Achievable Ubr; Figure 26: Pmp - Link Configuration Screen - Redline RedCONNEX RedACCESS AN-80IE User Manual

4.4.2

Link Screen

Click
New Link
Link Name: Enter a name for this
with the
Link ID
Link ID: (Read only) A unique
added.
Peer MAC: Enter the MAC address of the subscriber station. The sector controller only
registers a subscriber station if the MAC address has been entered using the link
configuration screen.
Max. DL Burst Rate: Select the downlink burst rate for unicast traffic from the sector
controller to the subscriber (based on link budget calculations).
Max UL Burst Rate: Select the uplink burst rate for unicast traffic from the subscriber to
the sector controller (based on link budget calculations).
70-00072-01-07
AN-80i
in the menu to add a new subscriber and choose the wireless parameters.

Figure 26: PMP - Link Configuration Screen

Link
on information and statistics screens.
Link ID

Table 17: PMP Maximum Achievable UBR

Uncoded Burst Rate (Mbps)
54
48
36
24
18
12
9
6
Proprietary Redline Communications © 2008
&
(15 characters max.). This
is generated automatically when a new link is
SINADR (dB)
25
23
18
15
11
9
9
7
User
Manual
name is displayed
Link
Page 52 of 106 Sept 18, 2008